Autoři: RZEPA, Sylwia, DŽUGAN, Jan, DANIEL, M., GOLDMANN, T., HUANG, Wei-Chin, SEDLÁČEK, R.
Periodikum: Materials
- Amplitude-dependent internal friction in AZ31 alloy sheets submitted to accumulative roll bonding
- Anisotropy of Thermal Expansion in an AZ31 Magnesium Alloy Subjected to the Accumulative Roll Bonding
- Characterization of the Microstructure, Local Macro-Texture and Residual Stress Field of Commercially Pure Titanium Grade 2 Prepared by CONFORM ECAP
- Cold/Hot Deformation Induced Recrystallization of Nickel-Based Superalloys for Molten Salt Reactors
- Comprehensive Evaluation of the Properties of Ultrafine to Nanocrystalline Grade 2 Titanium Wires
- Effect of Accumulative Roll Bonding of an AZ31 Alloy on the Microstructure and Tensile Stress
- Effect of the Parameters of Semi-Solid Processing on the Elimination of Sharp-Edged Primary Chromium Carbides from Tool Steel
- Effects of thickness and orientation on the small scale fracture behaviour of additively manufactured Ti-6Al-4V
- GAS NITRIDING WITH DEEP CRYOGENIC TREATMENT OF HIGH-SPEED STEEL
- Grain Structure and Microhardness Development of Twin-Roll Cast Aluminum Strips after Constrained Groove Pressing
- Hydrogen Embrittlement of a Quenching and Partitioning Steel during Corrosion and Zinc Electroplating
- Identification of ductile damage parameters for pressure vessel steel
- Influence of Accumulative Roll Bonding on the Texture and Tensile Properties of an AZ31 Magnesium Alloy Sheets
- Influence of strain rate on deformation behaviour of an AX52 alloy processed by equal channel angular pressing (ECAP)
- Micro-Tensile Behavior of Mg-Al-Zn Alloy Processed by Equal Channel Angular Pressing (ECAP)
- Microstructure, mechanical properties and welding of low carbon, medium manganese TWIP/TRIP steel
- Microwave spectrum and molecular constants of indole
- Possibilities of biocompatible material production using conform SPD technology
- Proliferation of Osteoblasts on Laser-Modified Nanostructured Titanium Surfaces
- Thermal Conductivity of an AZ31 Sheet After Accumulative Roll Bonding
- Two-body abrasion resistance of high-carbon high-silicon steel: Metastable austenite vs nanostructured bainite
- USING THERMOMECHANICAL TREATMENTS TO IMPROVE THE GRAIN GROWTH OF NEW-GENERATION ODS ALLOYS
- COMPARISON OF THE POWDER BED FUSED MATERIALS FROM DIFFERENT POWDER MANUFACTURERS
- Determination of Directional Residual Stresses by the Contour Method
- Effect of Rotary Swaging on Microstructure and Mechanical Properties of an AZ31 Magnesium Alloy
- Formation of Intermetallics Layers in Ni-Ti System Prepared by Direct Energy Deposition
- HAZ characterization of welded 42SiCr steel treated by quenching and partitioning
- Influence of Austenite Grain Size on Mechanical Properties after Quench and Partitioning Treatment of a 42SiCr Steel
- Influence of Heat Treatment on Microstructure and Properties of NiTi46 Alloy Consolidated by Spark Plasma Sintering
- IZBOLŠANJE VISOKOTEMPERATURNIH LASTNOSTI NOVE GENERACIJE Fe-Al-O JEKEL ZA OKSIDNO IZLOČEVALNO UTRJEVANJE
- Methods of testing the mechanical properties of additively manufactured components
- Molten Salt Corrosion of Ni-Mo-Cr Candidate Structural Materials for Molten Salt Reactor (MSR) Systems
- Strain Range Dependent Cyclic Hardening of 08Ch18N10T Stainless Steel—Experiments and Simulations
- Strengthening from Cu Addition in 0.2C-(1-2)Mn Steels during Tempering
- The Effect of Hot Working on the Mechanical Properties of High Strength Biomedical Ti-Nb-Ta-Zr-O Alloy
- THERMOELASTIC RESPONSE OF METALS AT DIFFERENT LOADING RATES
- Build Size and Orientation Influence on Mechanical Properties of Powder Bed Fusion Deposited Titanium Parts
- Continuous Production of Pure Titanium with Ultrafine to Nanocrystalline Microstructure
- Effect of Equal Channel Angular Extrusion on the Thermal Conductivity of an AX52 Magnesium Alloy
- Effect of Si Addition on Martensitic Transformation and Microstructure of NiTiSi Shape Memory Alloys
- Effects of build orientation and sample geometry on the mechanical response of miniature CP-Ti Grade 2 strut samples manufactured by laser powder bed fusion
- Effects of Rotary Swaging Parameters and Artificial Ageing on Mechanical Properties and Microstructure of 2024 Precipitation-Hardenable Aluminium Alloy
- Effects of Rotary Swaging, Wire Drawing and their Combination on the Resulting Properties of Nickel-alloy Wires
- Flexible manufacturing chain with integrated incremental bending and Q-P heat treatment for on-demand production of AHSS safety parts
- Formation of Phases in Reactively Sintered TiAl3 Alloy
- Formation of Phases in Reactively Sintered TiAl3 Alloy
- Fracture analysis in directed energy deposition (DED) manufactured 316L stainless steel using a phase-field approach
- Fracture Toughness Analysis of Automotive-Grade Dual-Phase Steel Using Essential Work of Fracture (EWF) Method
- Induction Annealing of Austenitic Spring Steels for Nuclear Reactors
- Influence of martensite deformation on Cu precipitation strengthening
- INFLUENCE OF PROCESSING CONDITIONS ON PROPERTIES OF AISI 316LN STEEL GRADE
- Influence of sandblasting and acid etching on fatigue properties of ultra-fine grained Ti grade 4 for dental implants
- Influence of thickness reduction on forming limits of mild steel DC01
- Local Mechanical Properties and Microstructure of EN AW 6082 Aluminium Alloy Processed via ECAP–Conform Technique
- Magnesium Reinforced with Inconel 718 Particles Prepared Ex Situ—Microstructure and Properties
- Microstructure and Mechanical Properties of COLD-DEFORMED PURE TITANIUM AND TITANIUM GRADE 5
- Numerical Simulation Development and Computational Optimization for Directed Energy Deposition Additive Manufacturing Process
- Optimization of the Mechanical Performance of Titanium for Biomedical Applications by Advanced, High-Gain SPD Technology
- Post-Processing Treatment Impact on Mechanical Properties of SLM Deposited Ti-6Al-4 V Porous Structure for Biomedical Application
- Small scale testing of IN718 single crystals manufactured by EB-PBF
- Strengthening and Thermally Activated Processes in An AX61/Saffil Metal Matrix Composite
- Structure and Properties of High-Strength Ti Grade 4 Prepared by Severe Plastic Deformation and Subsequent Heat Treatment
- Thermo-physical properties investigation in relation to deposition orientation for SLM deposited H13 steel
- Using DEFORM Software for Determination of Parameters for Two Fracture Criteria on DIN 34CrNiMo6
- A comprehensive description of reactions between nickel and aluminum powders during reactive sintering
- Accumulative roll-bonding of aluminium sheets at room and cryogenic temperatures
- Base Plate Preheating Effect on Microstructure of 316L Stainless Steel Single Track Deposition by Directed Energy Deposition
- Comparison of Industrial Quenching Oils
- Copper-Induced Strengthening in 0.2 C Bainite Steel
- Damage tolerant design of additively manufactured metallic components sub- jected to cyclic loading: State of the art and challenges Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges
- Determining Forming Limit Diagrams Using Sub-Sized Specimen Geometry and Comparing FLD Evaluation Methods
- Development of Universal Mould Geometry for the Teeming of Cylindrical Iron-Base Alloy Ingots
- Effect of 1.5 wt% Copper Addition and Various Contents of Silicon on Mechanical Properties of 1.7102 Medium Carbon Steel
- Effects of Silicon, Chromium, and Copper on Kinetic Parameters of Precipitation during Tempering of Medium Carbon Steels
- Experimental and computational analysis of additively manufactured tensile specimens, Assessment of localized-cooling rate and ductile fracture using the Gurson¬-Tvergaard-Needleman damage model
- Fatigue properties of UFG Ti grade 2 dental implant vs. conventionally tested smooth specimens
- Fracture locus characteristics of Al alloy 5083 processed by equal channel angular pressing using miniaturized specimens
- Fracture Prediction Based on Evaluation of Initial Porosity Induced By Direct Energy Deposition
- Fracture toughness examination of dual-phase and interstitial free steel using essential work of fracture method
- Low cycle fatigue properties assessment for rotor steels with the use of miniaturized specimens
- Mechanical properties after thermomechanical processing of cryogenic high-strength materials for magnet application
- Microstructural Observations of AM Deposited 15-5PH – Stellite Sample
- Strain Hardening in an AZ31 Alloy Submitted to Rotary Swaging
- Structural integrity and mechanical properties of the functionally graded material based on 316L/IN718 processed by DED technology
- Studying the Thermally Activated Processes Operating during Deformation of hcp and bcc Mg–Li Metal-Matrix Composites
- A New Alloying Concept for Low-Density Steels
- Achieving high strength and low elastic modulus in interstitial biomedical Ti–Nb–Zr–O alloys through compositional optimization
- Additive Manufacturing of Honeycomb Lattice Structure—From Theoretical Models to Polymer and Metal Products
- Boron influence on the development of Laves phase in 10Cr creep resistant steel
- Damage Evolution Simulations via a Coupled Crystal Plasticity and Cohesive Zone Model for Additively Manufactured Austenitic SS 316L DED Components
- Effect of deposit thickness on microstructure and mechanical properties at ambient and elevated temperatures for Inconel 718 superalloy fabricated by directed energy deposition
- Effect of laser power on thermal properties of multimaterial structure Inconel 718 and stainless steel 316L processed by directed energy deposition
- Elevated Temperature Baseplate Effect on Microstructure, Mechanical Properties, and Thermal Stress Evaluation by Numerical Simulation for Austenite Stainless Steel 316L Fabricated by Directed Energy Deposition
- Extended Continuous Cooling Transformation (CCT) Diagrams Determination for Additive Manufacturing Deposited Steels
- FINITE ELEMENT SIMULATION OF PLASTICITY AND FRACTURE FOR INCONEL 718 DEPOSITED BY LASER POWDER BED FUSION – CHANCES, USE AND CHALLENGES
- Fracture characterisation of vertically build functionally graded 316L stainless steel with Inconel 718 deposited by directed energy deposition process
- Heat Source Modeling and Residual Stress Analysis for Metal Directed Energy Deposition Additive Manufacturing
- Influence of the thermal history on the phase composition of laser directed energy deposited Ti-8.5 wt% Mo alloy
- Investigation of short-term creep properties of a coarse-grained Inconel 718 fabricated by directed energy deposition compared to traditional Inconel 718
- Original The influence of severe plastic deformation on the thermal expansion of additively manufactured Ti6Al4V alloy
- Prediction of the behaviour of the thin-walled additively manufactured structure by Directed Energy Deposition: An engineering approach to determine material parameters
- Stress Relaxation Tests: Modeling Issues and Applications in Magnesium Alloys and Composites
- The effects of post-processing on the local fracture toughness properties of electron beam powder bed fusion Ti-6Al-4V alloy
- The influence of laser power on the interfaces of functionally graded materials fabricated by powder-based directed energy deposition
- The Use of Miniature Specimens to Determine Local Properties and Fracture Behavior of LPBF-Processed Inconel 718 in as-Deposited and Post-Treated States
- Additive manufacturing multi-material components of SAF 2507 duplex steel and 15-5 PH martensitic stainless steel
- Ambient and High Temperature Tensile Behaviour of Dld-Manufactured Inconel 625/42c Steel Joint
- Aspects of Austenitization for the Bearing Steel Induction Quenching Design
- Aspects of Bending High-Borated Austenitic Stainless Steel Sheets for Interim Storage of Spent Nuclear Fuel
- Development of Mechanical Properties of Stainless Steel 316LN-IG after Cryo-Plastic Deformation
- Directed energy deposition of bulk Nb-Ta-Ti-Zr refractory complex concentrated alloy
- Effect of Cu Alloying on Mechanical Properties of Medium-C Steel after Long-Time Tempering at 500 °C
- Effect of Double-Step and Strain-Assisted Tempering on Properties of Medium-Carbon Steel
- Effect of ECAP on fracture toughness and fatigue endurance of DED-processed Ti-6Al-4V investigated on miniaturized specimens
- Effect of ECAP processing on microstructure and mechanical behaviour of Ti-6Al-4V manufactured by directed energy deposition
- Effect of Heat Treatment on Creep Deformation and Fracture Properties for a Coarse-Grained Inconel 718 Manufactured by Directed Energy Deposition
- Effect of Laser Traverse Speed during Laser Hardening on Hardness Distribution and Microstructure of Hot Work Tool Steel H11
- Effects of Cu microalloying on corrosion behavior of spring steel 54SiCr6
- Fatigue Properties of Spring Steels after Advanced Processing
- Grain refinement effect on fatigue life of two grades of commercially pure titanium
- Impact of ECAP processing on dislocation density and subgrain size in a Ti6Al4V alloy prepared by direct energy deposition
- In-situ directed energy deposition of Al based low density steel for automotive applications
- Influence of interface orientation and surface quality on structural and mechanical properties of SS316L/IN718 block produced using directed energy deposition
- Influence of Structural State prior Quenching in Spring Steel
- Interphase precipitation of Cu in dual-phase steel
- Kinetics of Austenite Decomposition in 54SiCr6 Steel during Continuous Slow Cooling Conditions
- Laves phase evolution in 10Cr-3W-3Co steel during thermal exposure and creep
- Material selection for cryogenically cooled toroidal field coils of the COMPASS-U tokamak
- Mechanical properties characterisation of metallic components produced by additive manufacturing using miniaturised specimens
- Mechanical Properties of High Carbon Low-Density Steels
- Microstructure and mechanical properties evolution of Ti-13Nb-13Zr alloy processed by ECAP-Conform and rotary swaging
- Microstructure evolution in compositionally graded Ti(4–12 wt% Mo) prepared by laser directed energy deposition
- Phase-field ductile fracture analysis of multi-materials and functionally graded composites through numerical and experimental methods
- Possibilities for Improvement of Mechanical Properties of High-Strength Medium-Carbon SiCr Steels
- Processing of Niobium-Alloyed High-Carbon Tool Steel via Additive Manufacturing and Modern Powder Metallurgy
- The effect of heat treatment on the interface of 15–5 PH martensitic stainless steel and SAF 2507 duplex steel in functionally graded AM components
- Thermal stability of dislocation structure and its effect on creep property in austenitic 316L stainless steel manufactured by directed energy deposition
- Through the Forming Process of Femtosecond-Laser Nanotextured Sheets for Production of Complex 3D Parts
- ULTRA-HIGH STRENGTH TWIP STEEL WITH HIGH CHROMIUM CONTENT
- A Review on Additive Manufacturing Methods for NiTi Shape Memory Alloy Production
- Assessment of location- and orientation-dependent fatigue behaviour for as-deposited LPBF Inconel 718 using miniaturized specimens
- ASTM interlaboratory study on tensile testing of AM deposited and wrought steel using miniature specimens
- Building rate effect on microstructure and high temperature mechanical properties of Austenitic 316L stainless steel manufactured by laser directed energy deposition
- Cold Spray Additive Manufacturing of Ti6Al4V: Deposition Optimization
- Comparative study of cell interaction and bacterial adhesion on titanium of different composition, structure and surfaces with various laser treatment
- Dilatometric Effects Accompanying Phase Transformations during Tempering of Spring Steels
- Effect of Solution Annealing on Microstructure, Tensile and Corrosion Properties of SDSS Deposited by Directed Energy Deposition
- Effect of thermal exposure on the microstructure and mechanical behaviour of high-chromium steel studied using sub-sized specimens
- Fracture behaviour assessment of the additively manufactured and HPT-processed Al–Si–Cu alloy
- High temperature fracture behavior of 316L stainless steel-Inconel 718 functionally graded materials manufactured by directed energy deposition: Role of interface orientation and heat treatment
- Importance of feedstock powder selection for mechanical properties improvement of cold spray additively manufactured Ti6Al4V deposits
- Influence of Zinc Chloride Exposure on Microstructure and Mechanical Behavior of Age-Hardened AZ91 Magnesium Alloy
- Twinning and Precipitation Processes in Hardened and Tempered 54SiCr6 Spring Steel
- Using physics-informed neural networks to predict the lifetime of laser powder bed fusion processed 316L stainless steel under multiaxial low-cycle fatigue loading
- Crack-Mitigating Strategy in Directed Energy Deposition of Refractory Complex Concentrated CrNbTiZr Alloy
- Directed Energy Deposition of NiTi Shape Memory Alloys: Comparison of Ni-Ti Powder Mixture vs. Pre-alloyed Powder Feedstock
- Influence of Deposition Parameters on the Building rate, In-Situ Formation of Austenite and Tensile Properties of SAF 2507 SDSS Fabricated by Directed Energy Deposition
- Interface structures and load-bearing mechanical properties in additively manufactured metallic functionally graded materials
- Microstructure and high temperature mechanical properties of refractory Cr-Nb-Ti-Zr alloy prepared by laser directed energy deposition
- Microstructure, Wettability and Corrosion Behaviors of TiO2 Nanotube Arrays on Ti-13Nb-13Zr Alloy
- Optimization of MoNiCr Alloy Production Through Additive Manufacturing
- Optimization of spark plasma sintering temperature: Influence on microstructure and mechanical properties of SAF 2507 duplex stainless steel
- Qualification of L-DED 316L for Nuclear Reactor Core Applications – Material Characteristics Before and After Neutron Irradiation
- The influence of nitrogen ion implantation on the microstructure and chemical composition of a thin layer on the biodegradable Zn-0.8Mg-0.2Sr substrate
- The master curve methodology at elevated loading rates: A detailed interlaboratory study
- High-throughput microstructure characterization of compositionally graded Cr–Nb–Ti–Zr complex concentrated alloys (CCA) prepared by laser directed energy deposition
- Press Hardening of High-Carbon Low-Density Steels
- Properties and Microstructure Evaluation of Laser-Welded TP347—TP904L High-Alloy, Stainless Steels Joints, Modified with 309L Filler
- Spatially resolved XRD using polychromatic fan beam and a hybrid pixel detectors Timepix3
- Transmission energy dispersive X-ray diffraction as a tool for the laboratory study of fast processes in metals