Přeskočit na obsah
  • +420 377 197 311

  • comtes@comtesfht.cz

  • Čeština
COMTES FHT Logo
  • Aktivity
  • Reference
  • O nás
    • Aktuality
    • Lidé
    • Organizační struktura
    • Fotografie
    • Video
    • Ke stažení
    • Členství
    • Kariéra
  • Projekty
  • Konference
  • Výsledy VaV
    • ČlánkyOdborné publikace společnosti představují klíčový výstup výzkumné a vývojové činnosti a dokumentují dlouhodobou spolupráci s akademickou i průmyslovou sférou. Seznam publikací je strukturován podle jednotlivých let a poskytuje přehled o kontinuálním rozvoji odborných znalostí a inovací v rámci společnosti. Tato činnost přispívá k šíření know-how, posilování odborné reputace a aplikaci nejnovějších poznatků v průmyslové praxi.
    • PatentyPatentová činnost představuje důležitou součást transferu znalostí do průmyslové praxe a potvrzuje schopnost společnosti přinášet nová, konkurenceschopná řešení v oblasti moderních materiálů a výrobních technologií. Udělené patenty dokumentují nejen odbornou úroveň výzkumu, ale také jeho praktické uplatnění v reálných aplikacích.
  • Kontaktujte nás

2018

Domů / Články / 2018
  • Microwave spectrum and molecular constants of indole

    Název článku : Microwave spectrum and molecular constants of indole Seznam autorů : NESVADBA R.; STUDECKÝ Tomáš; UHLÍKOVÁ T.; URBAN Š. Název periodika : Journal of Molecular Spectroscopy...

    Číst více
  • Influence of Accumulative Roll Bonding on the Texture and Tensile Properties of an AZ31 Magnesium Alloy Sheets

    Autoři:  TROJANOVÁ Zuzanka; DŽUGAN Jan; HALMEŠOVÁ Kristýna; BOHLEN Jan; LUKÁČ Pavel; MINÁRIK Peter; NÉMETH Gergely Periodikum:  Materials 2018 Odkaz: http://www.mdpi.com/1996-1944/11/1/73

    Číst více
  • Identification of ductile damage parameters for pressure vessel steel

    Autoři:  DŽUGAN Jan; KONOPÍK Pavel; KUŽELKA Jiří; PRANTL Antonín; RŮŽIČKA Jan; ŠPANIEL Miroslav Periodikum:  Nuclear Engineering and Design Odkaz: https://www.sciencedirect.com/science/article/pii/S0029549315006007?via%3Dihub

    Číst více
  • Effects of thickness and orientation on the small scale fracture behaviour of additively manufactured Ti-6Al-4V

    Autoři:  DŽUGAN Jan; KONOPÍK Pavel; PODANÝ Pavel; PROCHÁZKA Radek; RUND Martin; LEWANDOWSKI J. J.; SEIFI M. Periodikum:  Materials Characterization Odkaz: https://www.sciencedirect.com/science/article/pii/S1044580317328802

    Číst více
  • Microstructure, mechanical properties and welding of low carbon, medium manganese TWIP/TRIP steel

    Autoři:  PODANÝ Pavel; KOUKOLÍKOVÁ Martina; PROCHÁZKA Radek; FRANC Aleš; REARDON; Christopher Periodikum:  Metals Odkaz: https://www.researchgate.net/publication/324486536_Microstructure_Mechanical_Properties_and_Welding_of_Low_Carbon_Medium_Manganese_TWIPTRIP_Steel

    Číst více
  • Cold/Hot Deformation Induced Recrystallization of Nickel-Based Superalloys for Molten Salt Reactors

    Autoři:  KOUKOLÍKOVÁ Martina; ČERNÝ Jan; DLOUHÝ Jaromír; SLÁMA Peter; MAREČEK Martin Periodikum:  Metals Odkaz: https://www.mdpi.com/2075-4701/8/7/477

    Číst více
  • Thermal Conductivity of an AZ31 Sheet After Accumulative Roll Bonding

    Autoři:  TROJANOVÁ Zuzanka; DŽUGAN Jan; HALMEŠOVÁ Kristýna; DROZD Zdeněk; LUKÁČ Pavel; MINÁRIK Peter; ŠÍMA Vladimír Periodikum:  Crystals Odkaz: https://www.mdpi.com/2073-4352/8/7/278

    Číst více
  • Amplitude-dependent internal friction in AZ31 alloy sheets submitted to accumulative roll bonding

    Autoři: TROJANOVÁ Zuzanka; DŽUGAN Jan; HALMEŠOVÁ Kristýna; DROZD Z.; LUKÁČ P.; MINÁRIK P. Periodikum: Low Temperature Physics/Fizika Nizkikh Temperatur, 2018 Odkaz: https://www.researchgate.net/publication/327176047_Amplitude-dependent_internal_friction_in_AZ31_alloy_sheets_submitted_to_accumulative_roll_bonding

    Číst více
  • GAS NITRIDING WITH DEEP CRYOGENIC TREATMENT OF HIGH-SPEED STEEL

    Autoři:  HRADIL David; DUCHEK Michal; HRBÁČKOVÁ Taťana; CISKI A. Periodikum:  ACTA METALLURGICA SLOVACA Odkaz: http://www.qip-journal.eu/index.php/ams/article/view/1058

    Číst více
  • USING THERMOMECHANICAL TREATMENTS TO IMPROVE THE GRAIN GROWTH OF NEW-GENERATION ODS ALLOYS

    Autoři:  KHALAJ Omid; STUDECKÝ Tomáš; HASSASROUDSARI Parsa; JIRKOVÁ Hana; MAŠEK Bohuslav; SVOBODA Jiří Periodikum:  Materials and technology Odkaz: http://mit.imt.si/Revija/izvodi/mit184/khalaj.pdf

    Číst více
  • Possibilities of biocompatible material production using conform SPD technology

    Autoři:  PALÁN Jan; DŽUGAN Jan; HODEK Josef; MALEČEK Ladislav; ZEMKO Michal Periodikum:  Archives of Materials Science and Engineering Odkaz: https://www.researchgate.net/publication/322213052_Possibilities_of_biocompatible_material_production_using_conform_SPD_technology

    Číst více
  • Effect of the Parameters of Semi-Solid Processing on the Elimination of Sharp-Edged Primary Chromium Carbides from Tool Steel

    Autoři:  JIRKOVÁ H.; KONOPÍK Pavel; OPATOVÁ K.; RUBEŠOVÁ K. Periodikum:  Metals Odkaz: https://www.mdpi.com/2075-4701/8/9/713

    Číst více
  • Two-body abrasion resistance of high-carbon high-silicon steel: Metastable austenite vs nanostructured bainite

    Autoři:  EFREMENKO, V.G., ŠUCHMANN, Pavel, BRYKOV, M.N., FRIEDRICH, Th., HESSE, O., KUNERT, M., SHIMIZU, K., ZURNADZHY, V.I. Periodikum:  Wear Odkaz: https://www.sciencedirect.com/science/article/pii/S0043164818309906?utm_campaign=STMJ_75273_AUTH_SERV_PPUB&utm_medium=email&utm_dgroup=&utm_acid=137863039&SIS_ID=0&dgcid=STMJ_75273_AUTH_SERV_PPUB&CMX_ID=&utm_in=DM409026&utm_source=AC_30

    Číst více
  • Proliferation of Osteoblasts on Laser-Modified Nanostructured Titanium Surfaces

    Autoři:  BABUŠKA V.; ČERNÝ Jan; DUCHEK Michal; PALÁN Jan; DOBRA J. K.; HRUŠÁK D.; KULDA V. Periodikum:  Materials Odkaz: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6213816/

    Číst více
  • Anisotropy of Thermal Expansion in an AZ31 Magnesium Alloy Subjected to the Accumulative Roll Bonding

    Autoři: DROZD Z.; DŽUGAN Jan; HALMEŠOVÁ Kristýna; LUKÁČ P.; MINÁRIK P.; TROJANOVÁ Z. Periodikum: ACTA PHYSICA POLONICA A Odkaz: http://przyrbwn.icm.edu.pl/APP/PDF/134/app134z3p47.pdf

    Číst více
  • Effect of Accumulative Roll Bonding of an AZ31 Alloy on the Microstructure and Tensile Stress

    Autoři:  TROJANOVÁ, Z., DŽUGAN, Jan, HALMEŠOVÁ, Kristýna, LUKÁČ, P., NÉMETH, G., MINÁRIK, P. Periodikum:  ACTA PHYSICA POLONICA A Odkaz: http://przyrbwn.icm.edu.pl/APP/PDF/134/app134z3p56.pdf

    Číst více
  • Characterization of the Microstructure, Local Macro-Texture and Residual Stress Field of Commercially Pure Titanium Grade 2 Prepared by CONFORM ECAP

    Autoři:  NÉMETH Gergely; DUCHEK Michal; PALÁN Jan; CEJPEK Petr; HERVOCHES Charles; HORVÁTH Klaudia; MÁTHIS Kristián Periodikum:  Metals Odkaz: https://www.mdpi.com/2075-4701/8/12/1000

    Číst více
  • Grain Structure and Microhardness Development of Twin-Roll Cast Aluminum Strips after Constrained Groove Pressing

    Autoři:  BAJER J.; NOVÝ Zbyšek; CIESLAR M.; ŠLAPÁKOVÁ M.; ZIMINA M. Periodikum:  ACTA PHYSICA POLONICA A Odkaz: http://przyrbwn.icm.edu.pl/APP/PDF/134/app134z3p66.pdf

    Číst více
  • Hydrogen Embrittlement of a Quenching and Partitioning Steel during Corrosion and Zinc Electroplating

    Autoři:  MEHNER T.; MAŠEK Bohuslav; FRINT P.; LAMPKE T.; SCHARF I.; SCHUBERT F.; WAGNER M.F.-X. Periodikum:  MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS...

    Číst více
  • Comprehensive Evaluation of the Properties of Ultrafine to Nanocrystalline Grade 2 Titanium Wires

    Autoři:  PALÁN Jan; DUCHEK Michal; DŽUGAN Jan; NACHÁZEL Jan; PROCHÁZKA Radek; HORVÁTH Klaudia; MÁTHIS Kristián; MINÁRIK Peter; NÉMETH Gergely Periodikum:  Materials Odkaz:...

    Číst více
  • Influence of strain rate on deformation behaviour of an AX52 alloy processed by equal channel angular pressing (ECAP)

    Autoři:  : TROJANOVÁ Z.; DŽUGAN Jan; HALMEŠOVÁ Kristýna; LUKÁČ P.; MINÁRIK P.; PALČEK P. Periodikum:  Letters on Materials Odkaz: https://lettersonmaterials.com/en/Readers/Article.aspx?aid=9908

    Číst více
  • Micro-Tensile Behavior of Mg-Al-Zn Alloy Processed by Equal Channel Angular Pressing (ECAP)

    Autoři:  MATHIS K.; DŽUGAN Jan; HALMEŠOVÁ Kristýna; KOVER M.; STRASKA J.; TROJANOVÁ Z. Periodikum:  MATERIALS Odkaz: https://www.mdpi.com/1996-1944/11/9/1644/htm

    Číst více
  • Články
    • 2018
      • Amplitude-dependent internal friction in AZ31 alloy sheets submitted to accumulative roll bonding
      • Anisotropy of Thermal Expansion in an AZ31 Magnesium Alloy Subjected to the Accumulative Roll Bonding
      • Characterization of the Microstructure, Local Macro-Texture and Residual Stress Field of Commercially Pure Titanium Grade 2 Prepared by CONFORM ECAP
      • Cold/Hot Deformation Induced Recrystallization of Nickel-Based Superalloys for Molten Salt Reactors
      • Comprehensive Evaluation of the Properties of Ultrafine to Nanocrystalline Grade 2 Titanium Wires
      • Effect of Accumulative Roll Bonding of an AZ31 Alloy on the Microstructure and Tensile Stress
      • Effect of the Parameters of Semi-Solid Processing on the Elimination of Sharp-Edged Primary Chromium Carbides from Tool Steel
      • Effects of thickness and orientation on the small scale fracture behaviour of additively manufactured Ti-6Al-4V
      • GAS NITRIDING WITH DEEP CRYOGENIC TREATMENT OF HIGH-SPEED STEEL
      • Grain Structure and Microhardness Development of Twin-Roll Cast Aluminum Strips after Constrained Groove Pressing
      • Hydrogen Embrittlement of a Quenching and Partitioning Steel during Corrosion and Zinc Electroplating
      • Identification of ductile damage parameters for pressure vessel steel
      • Influence of Accumulative Roll Bonding on the Texture and Tensile Properties of an AZ31 Magnesium Alloy Sheets
      • Influence of strain rate on deformation behaviour of an AX52 alloy processed by equal channel angular pressing (ECAP)
      • Micro-Tensile Behavior of Mg-Al-Zn Alloy Processed by Equal Channel Angular Pressing (ECAP)
      • Microstructure, mechanical properties and welding of low carbon, medium manganese TWIP/TRIP steel
      • Microwave spectrum and molecular constants of indole
      • Possibilities of biocompatible material production using conform SPD technology
      • Proliferation of Osteoblasts on Laser-Modified Nanostructured Titanium Surfaces
      • Thermal Conductivity of an AZ31 Sheet After Accumulative Roll Bonding
      • Two-body abrasion resistance of high-carbon high-silicon steel: Metastable austenite vs nanostructured bainite
      • USING THERMOMECHANICAL TREATMENTS TO IMPROVE THE GRAIN GROWTH OF NEW-GENERATION ODS ALLOYS
    • 2019
      • COMPARISON OF THE POWDER BED FUSED MATERIALS FROM DIFFERENT POWDER MANUFACTURERS
      • Determination of Directional Residual Stresses by the Contour Method
      • Effect of Rotary Swaging on Microstructure and Mechanical Properties of an AZ31 Magnesium Alloy
      • Formation of Intermetallics Layers in Ni-Ti System Prepared by Direct Energy Deposition
      • HAZ characterization of welded 42SiCr steel treated by quenching and partitioning
      • Influence of Austenite Grain Size on Mechanical Properties after Quench and Partitioning Treatment of a 42SiCr Steel
      • Influence of Heat Treatment on Microstructure and Properties of NiTi46 Alloy Consolidated by Spark Plasma Sintering
      • IZBOLŠANJE VISOKOTEMPERATURNIH LASTNOSTI NOVE GENERACIJE Fe-Al-O JEKEL ZA OKSIDNO IZLOČEVALNO UTRJEVANJE
      • Methods of testing the mechanical properties of additively manufactured components
      • Molten Salt Corrosion of Ni-Mo-Cr Candidate Structural Materials for Molten Salt Reactor (MSR) Systems
      • Strain Range Dependent Cyclic Hardening of 08Ch18N10T Stainless Steel—Experiments and Simulations
      • Strengthening from Cu Addition in 0.2C-(1-2)Mn Steels during Tempering
      • The Effect of Hot Working on the Mechanical Properties of High Strength Biomedical Ti-Nb-Ta-Zr-O Alloy
      • THERMOELASTIC RESPONSE OF METALS AT DIFFERENT LOADING RATES
    • 2020
      • Build Size and Orientation Influence on Mechanical Properties of Powder Bed Fusion Deposited Titanium Parts
      • Continuous Production of Pure Titanium with Ultrafine to Nanocrystalline Microstructure
      • Effect of Equal Channel Angular Extrusion on the Thermal Conductivity of an AX52 Magnesium Alloy
      • Effect of Si Addition on Martensitic Transformation and Microstructure of NiTiSi Shape Memory Alloys
      • Effects of build orientation and sample geometry on the mechanical response of miniature CP-Ti Grade 2 strut samples manufactured by laser powder bed fusion
      • Effects of Rotary Swaging Parameters and Artificial Ageing on Mechanical Properties and Microstructure of 2024 Precipitation-Hardenable Aluminium Alloy
      • Effects of Rotary Swaging, Wire Drawing and their Combination on the Resulting Properties of Nickel-alloy Wires
      • Flexible manufacturing chain with integrated incremental bending and Q-P heat treatment for on-demand production of AHSS safety parts
      • Formation of Phases in Reactively Sintered TiAl3 Alloy
      • Formation of Phases in Reactively Sintered TiAl3 Alloy
      • Fracture analysis in directed energy deposition (DED) manufactured 316L stainless steel using a phase-field approach
      • Fracture Toughness Analysis of Automotive-Grade Dual-Phase Steel Using Essential Work of Fracture (EWF) Method
      • Induction Annealing of Austenitic Spring Steels for Nuclear Reactors
      • Influence of martensite deformation on Cu precipitation strengthening
      • INFLUENCE OF PROCESSING CONDITIONS ON PROPERTIES OF AISI 316LN STEEL GRADE
      • Influence of sandblasting and acid etching on fatigue properties of ultra-fine grained Ti grade 4 for dental implants
      • Influence of thickness reduction on forming limits of mild steel DC01
      • Local Mechanical Properties and Microstructure of EN AW 6082 Aluminium Alloy Processed via ECAP–Conform Technique
      • Magnesium Reinforced with Inconel 718 Particles Prepared Ex Situ—Microstructure and Properties
      • Microstructure and Mechanical Properties of COLD-DEFORMED PURE TITANIUM AND TITANIUM GRADE 5
      • Numerical Simulation Development and Computational Optimization for Directed Energy Deposition Additive Manufacturing Process
      • Optimization of the Mechanical Performance of Titanium for Biomedical Applications by Advanced, High-Gain SPD Technology
      • Post-Processing Treatment Impact on Mechanical Properties of SLM Deposited Ti-6Al-4 V Porous Structure for Biomedical Application
      • Small scale testing of IN718 single crystals manufactured by EB-PBF
      • Strengthening and Thermally Activated Processes in An AX61/Saffil Metal Matrix Composite
      • Structure and Properties of High-Strength Ti Grade 4 Prepared by Severe Plastic Deformation and Subsequent Heat Treatment
      • Thermo-physical properties investigation in relation to deposition orientation for SLM deposited H13 steel
      • Using DEFORM Software for Determination of Parameters for Two Fracture Criteria on DIN 34CrNiMo6
    • 2021
      • A comprehensive description of reactions between nickel and aluminum powders during reactive sintering
      • Accumulative roll-bonding of aluminium sheets at room and cryogenic temperatures
      • Base Plate Preheating Effect on Microstructure of 316L Stainless Steel Single Track Deposition by Directed Energy Deposition
      • Comparison of Industrial Quenching Oils
      • Copper-Induced Strengthening in 0.2 C Bainite Steel
      • Damage tolerant design of additively manufactured metallic components sub- jected to cyclic loading: State of the art and challenges Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges
      • Determining Forming Limit Diagrams Using Sub-Sized Specimen Geometry and Comparing FLD Evaluation Methods
      • Development of Universal Mould Geometry for the Teeming of Cylindrical Iron-Base Alloy Ingots
      • Effect of 1.5 wt% Copper Addition and Various Contents of Silicon on Mechanical Properties of 1.7102 Medium Carbon Steel
      • Effects of Silicon, Chromium, and Copper on Kinetic Parameters of Precipitation during Tempering of Medium Carbon Steels
      • Experimental and computational analysis of additively manufactured tensile specimens, Assessment of localized-cooling rate and ductile fracture using the Gurson¬-Tvergaard-Needleman damage model
      • Fatigue properties of UFG Ti grade 2 dental implant vs. conventionally tested smooth specimens
      • Fracture locus characteristics of Al alloy 5083 processed by equal channel angular pressing using miniaturized specimens
      • Fracture Prediction Based on Evaluation of Initial Porosity Induced By Direct Energy Deposition
      • Fracture toughness examination of dual-phase and interstitial free steel using essential work of fracture method
      • Low cycle fatigue properties assessment for rotor steels with the use of miniaturized specimens
      • Mechanical properties after thermomechanical processing of cryogenic high-strength materials for magnet application
      • Microstructural Observations of AM Deposited 15-5PH – Stellite Sample
      • Strain Hardening in an AZ31 Alloy Submitted to Rotary Swaging
      • Structural integrity and mechanical properties of the functionally graded material based on 316L/IN718 processed by DED technology
      • Studying the Thermally Activated Processes Operating during Deformation of hcp and bcc Mg–Li Metal-Matrix Composites
    • 2022
      • A New Alloying Concept for Low-Density Steels
      • Achieving high strength and low elastic modulus in interstitial biomedical Ti–Nb–Zr–O alloys through compositional optimization
      • Additive Manufacturing of Honeycomb Lattice Structure—From Theoretical Models to Polymer and Metal Products
      • Boron influence on the development of Laves phase in 10Cr creep resistant steel
      • Damage Evolution Simulations via a Coupled Crystal Plasticity and Cohesive Zone Model for Additively Manufactured Austenitic SS 316L DED Components
      • Effect of deposit thickness on microstructure and mechanical properties at ambient and elevated temperatures for Inconel 718 superalloy fabricated by directed energy deposition
      • Effect of laser power on thermal properties of multimaterial structure Inconel 718 and stainless steel 316L processed by directed energy deposition
      • Elevated Temperature Baseplate Effect on Microstructure, Mechanical Properties, and Thermal Stress Evaluation by Numerical Simulation for Austenite Stainless Steel 316L Fabricated by Directed Energy Deposition
      • Extended Continuous Cooling Transformation (CCT) Diagrams Determination for Additive Manufacturing Deposited Steels
      • FINITE ELEMENT SIMULATION OF PLASTICITY AND FRACTURE FOR INCONEL 718 DEPOSITED BY LASER POWDER BED FUSION – CHANCES, USE AND CHALLENGES
      • Fracture characterisation of vertically build functionally graded 316L stainless steel with Inconel 718 deposited by directed energy deposition process
      • Heat Source Modeling and Residual Stress Analysis for Metal Directed Energy Deposition Additive Manufacturing
      • Influence of the thermal history on the phase composition of laser directed energy deposited Ti-8.5 wt% Mo alloy
      • Investigation of short-term creep properties of a coarse-grained Inconel 718 fabricated by directed energy deposition compared to traditional Inconel 718
      • Original The influence of severe plastic deformation on the thermal expansion of additively manufactured Ti6Al4V alloy
      • Prediction of the behaviour of the thin-walled additively manufactured structure by Directed Energy Deposition: An engineering approach to determine material parameters
      • Stress Relaxation Tests: Modeling Issues and Applications in Magnesium Alloys and Composites
      • The effects of post-processing on the local fracture toughness properties of electron beam powder bed fusion Ti-6Al-4V alloy
      • The influence of laser power on the interfaces of functionally graded materials fabricated by powder-based directed energy deposition
      • The Use of Miniature Specimens to Determine Local Properties and Fracture Behavior of LPBF-Processed Inconel 718 in as-Deposited and Post-Treated States
    • 2023
      • Additive manufacturing multi-material components of SAF 2507 duplex steel and 15-5 PH martensitic stainless steel
      • Ambient and High Temperature Tensile Behaviour of Dld-Manufactured Inconel 625/42c Steel Joint
      • Aspects of Austenitization for the Bearing Steel Induction Quenching Design
      • Aspects of Bending High-Borated Austenitic Stainless Steel Sheets for Interim Storage of Spent Nuclear Fuel
      • Development of Mechanical Properties of Stainless Steel 316LN-IG after Cryo-Plastic Deformation
      • Directed energy deposition of bulk Nb-Ta-Ti-Zr refractory complex concentrated alloy
      • Effect of Cu Alloying on Mechanical Properties of Medium-C Steel after Long-Time Tempering at 500 °C
      • Effect of Double-Step and Strain-Assisted Tempering on Properties of Medium-Carbon Steel
      • Effect of ECAP on fracture toughness and fatigue endurance of DED-processed Ti-6Al-4V investigated on miniaturized specimens
      • Effect of ECAP processing on microstructure and mechanical behaviour of Ti-6Al-4V manufactured by directed energy deposition
      • Effect of Heat Treatment on Creep Deformation and Fracture Properties for a Coarse-Grained Inconel 718 Manufactured by Directed Energy Deposition
      • Effect of Laser Traverse Speed during Laser Hardening on Hardness Distribution and Microstructure of Hot Work Tool Steel H11
      • Effects of Cu microalloying on corrosion behavior of spring steel 54SiCr6
      • Fatigue Properties of Spring Steels after Advanced Processing
      • Grain refinement effect on fatigue life of two grades of commercially pure titanium
      • Impact of ECAP processing on dislocation density and subgrain size in a Ti6Al4V alloy prepared by direct energy deposition
      • In-situ directed energy deposition of Al based low density steel for automotive applications
      • Influence of interface orientation and surface quality on structural and mechanical properties of SS316L/IN718 block produced using directed energy deposition
      • Influence of Structural State prior Quenching in Spring Steel
      • Interphase precipitation of Cu in dual-phase steel
      • Kinetics of Austenite Decomposition in 54SiCr6 Steel during Continuous Slow Cooling Conditions
      • Laves phase evolution in 10Cr-3W-3Co steel during thermal exposure and creep
      • Material selection for cryogenically cooled toroidal field coils of the COMPASS-U tokamak
      • Mechanical properties characterisation of metallic components produced by additive manufacturing using miniaturised specimens
      • Mechanical Properties of High Carbon Low-Density Steels
      • Microstructure and mechanical properties evolution of Ti-13Nb-13Zr alloy processed by ECAP-Conform and rotary swaging
      • Microstructure evolution in compositionally graded Ti(4–12 wt% Mo) prepared by laser directed energy deposition
      • Phase-field ductile fracture analysis of multi-materials and functionally graded composites through numerical and experimental methods
      • Possibilities for Improvement of Mechanical Properties of High-Strength Medium-Carbon SiCr Steels
      • Processing of Niobium-Alloyed High-Carbon Tool Steel via Additive Manufacturing and Modern Powder Metallurgy
      • The effect of heat treatment on the interface of 15–5 PH martensitic stainless steel and SAF 2507 duplex steel in functionally graded AM components
      • Thermal stability of dislocation structure and its effect on creep property in austenitic 316L stainless steel manufactured by directed energy deposition
      • Through the Forming Process of Femtosecond-Laser Nanotextured Sheets for Production of Complex 3D Parts
      • ULTRA-HIGH STRENGTH TWIP STEEL WITH HIGH CHROMIUM CONTENT
    • 2024
      • A Review on Additive Manufacturing Methods for NiTi Shape Memory Alloy Production
      • Assessment of location- and orientation-dependent fatigue behaviour for as-deposited LPBF Inconel 718 using miniaturized specimens
      • ASTM interlaboratory study on tensile testing of AM deposited and wrought steel using miniature specimens
      • Building rate effect on microstructure and high temperature mechanical properties of Austenitic 316L stainless steel manufactured by laser directed energy deposition
      • Cold Spray Additive Manufacturing of Ti6Al4V: Deposition Optimization
      • Comparative study of cell interaction and bacterial adhesion on titanium of different composition, structure and surfaces with various laser treatment
      • Dilatometric Effects Accompanying Phase Transformations during Tempering of Spring Steels
      • Effect of Solution Annealing on Microstructure, Tensile and Corrosion Properties of SDSS Deposited by Directed Energy Deposition
      • Effect of thermal exposure on the microstructure and mechanical behaviour of high-chromium steel studied using sub-sized specimens
      • Fracture behaviour assessment of the additively manufactured and HPT-processed Al–Si–Cu alloy
      • High temperature fracture behavior of 316L stainless steel-Inconel 718 functionally graded materials manufactured by directed energy deposition: Role of interface orientation and heat treatment
      • Importance of feedstock powder selection for mechanical properties improvement of cold spray additively manufactured Ti6Al4V deposits
      • Influence of Zinc Chloride Exposure on Microstructure and Mechanical Behavior of Age-Hardened AZ91 Magnesium Alloy
      • Twinning and Precipitation Processes in Hardened and Tempered 54SiCr6 Spring Steel
      • Using physics-informed neural networks to predict the lifetime of laser powder bed fusion processed 316L stainless steel under multiaxial low-cycle fatigue loading
    • 2025
      • Crack-Mitigating Strategy in Directed Energy Deposition of Refractory Complex Concentrated CrNbTiZr Alloy
      • Directed Energy Deposition of NiTi Shape Memory Alloys: Comparison of Ni-Ti Powder Mixture vs. Pre-alloyed Powder Feedstock
      • Influence of Deposition Parameters on the Building rate, In-Situ Formation of Austenite and Tensile Properties of SAF 2507 SDSS Fabricated by Directed Energy Deposition
      • Interface structures and load-bearing mechanical properties in additively manufactured metallic functionally graded materials
      • Microstructure and high temperature mechanical properties of refractory Cr-Nb-Ti-Zr alloy prepared by laser directed energy deposition
      • Microstructure, Wettability and Corrosion Behaviors of TiO2 Nanotube Arrays on Ti-13Nb-13Zr Alloy
      • Optimization of MoNiCr Alloy Production Through Additive Manufacturing
      • Optimization of spark plasma sintering temperature: Influence on microstructure and mechanical properties of SAF 2507 duplex stainless steel
      • Qualification of L-DED 316L for Nuclear Reactor Core Applications – Material Characteristics Before and After Neutron Irradiation
      • The influence of nitrogen ion implantation on the microstructure and chemical composition of a thin layer on the biodegradable Zn-0.8Mg-0.2Sr substrate
      • The master curve methodology at elevated loading rates: A detailed interlaboratory study
    • 2026
      • High-throughput microstructure characterization of compositionally graded Cr–Nb–Ti–Zr complex concentrated alloys (CCA) prepared by laser directed energy deposition
      • Press Hardening of High-Carbon Low-Density Steels
      • Properties and Microstructure Evaluation of Laser-Welded TP347—TP904L High-Alloy, Stainless Steels Joints, Modified with 309L Filler
      • Spatially resolved XRD using polychromatic fan beam and a hybrid pixel detectors Timepix3
      • Transmission energy dispersive X-ray diffraction as a tool for the laboratory study of fast processes in metals
  • Patenty
    • 2018
      • Federnde Bauteile aus einer Stahllegierung und Herstellungsverfahren
      • Fyzioterapeutický trenažér
      • Gear driven by wobble movement and vehicle with this gear
      • Způsob výroby dřevěných nosníků se zalisovanou ocelovou výztuží zatepla
    • 2020
    • 2021
      • Monolitické těleso obsahující paměťovou slitinu a způsob jeho výroby
      • Sestava elektrody pro plazmový obloukový hořák se zlepšeným přenosem elektrického proudu

Vývoj technologií tváření a technologií tepelného zpracování kovových materiálů, materiálový výzkum, transfer technologií, inovace, zkušebnictví a poradenství.

Mohlo by Vás zajímat
  • Proinno a.s.
  • COMTES DFM s.r.o.
  • VTP COMTES
  • DIH-HIVE
  • ET Additive s.r.o.
Aktuality
  • Ing. Libor Kraus získal ocenění Osobnost roku
  • Prof. Ing. Jan Džugan, Ph.D. byl zvolen členem GA ČR
  • Materiálové inženýrství a česká inovační politika
  • Proof of concept studie a práce s velkými daty
  • COMAT 2026
Kontakt
  • Průmyslová 995,
    Dobřany, 334 41

  • +420 377 197 311

  • comtes@comtesfht.cz

© 2026 COMTES FHT a.s. | Vytvořila digitální agentura 4WORKS Solutions | GDPR Ready

Page load link
Přejít nahoru